Filter

Compression Loads

30 books found

Study of compression-loaded and impact-damaged structurally efficient graphite-thermoplastic trapezoidal-corrugation sandwich and semisandwich panels

Study of compression-loaded and impact-damaged structurally ...

by Dawn C. Jegley

1992 4 ed.

Short-wavelength buckling and shear failures for compression-loaded composite laminates

Short-wavelength buckling and shear failures for compression...

by Mark J. Shuart

1985 3 ed.

The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy

The effects of compressive preloads on the compression-after...

by Alan T. Nettles

1992 2 ed.

Analytical comparison of three stiffened panel concepts

Analytical comparison of three stiffened panel concepts

by Jill M. Maloney

1995 2 ed.

Test load verification through strain data analysis

Test load verification through strain data analysis

by V. Verderaime

1995 2 ed.

Reliability-based failure analysis of brittle materials

Reliability-based failure analysis of brittle materials

by Lynn M. Powers

1989 2 ed.

Prestraining and its influence on subsequent fatigue life

Prestraining and its influence on subsequent fatigue life

by Sreeramesh Kalluri

1995 2 ed.

The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy

The effects of compressive preloads on the compression-after...

by A. T. Nettles

1992 2 ed.

The utilization of advanced composites in military aircraft

The utilization of advanced composites in military aircraft

by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development.

1992 2 ed.

Overload and underload effects on the fatigue crack growth behavior of the 2024-T3 aluminum alloy

Overload and underload effects on the fatigue crack growth b...

by D. S. Dawicke

1997 1 ed.

Simplification of fatigue test requirements for damage tolerance of composite interstage launch vehicle hardware

Simplification of fatigue test requirements for damage toler...

by A. T. Nettles

2010 1 ed.

Normalization of impact energy by laminate thickness for compression after impact testing

Normalization of impact energy by laminate thickness for com...

by A. T. Nettles

2013 1 ed.

Measurement of displacement around holes in composite plates subjected to quasi-static compression

Measurement of displacement around holes in composite plates...

by John C. Duke

1986 1 ed.

Behavior of damaged graphite/epoxy laminates under compressi...

by Bruce A. Byers

1980 1 ed.

Theoretical-experimental correlation for buckling of composite cylinders under combined compression and torsion

Theoretical-experimental correlation for buckling of composi...

by Carl T. Herakovich

1978 1 ed.

Micromechanics of compression failures in open hole composite laminates

Micromechanics of compression failures in open hole composit...

by Eunice Gail Guynn

1987 1 ed.

Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts

Buckling and postbuckling behavior of square compression-loa...

by Michael P. Nemeth

1990 1 ed.

Analysis of selected compression splice joint locations in a graphite-epoxy transport wing stub box

Analysis of selected compression splice joint locations in a...

by Dawn C. Jegley

1995 1 ed.

Investigation of anomalous behavior in metallic-based materi...

by Christopher M. Gil

1998 1 ed.

Analysis and test of superplastically formed titanium hat-stiffened panels under compression

Analysis and test of superplastically formed titanium hat-st...

by Randall C. Davis

1986 1 ed.