Filter

Compression Loads.

30 books found

Study of compression-loaded and impact-damaged structurally efficient graphite-thermoplastic trapezoidal-corrugation sandwich and semisandwich panels
Study of compression-loaded and impact-damaged structurally ...

by Dawn C. Jegley

1992 4 ed.
Short-wavelength buckling and shear failures for compression-loaded composite laminates
Short-wavelength buckling and shear failures for compression...

by Mark J. Shuart

1985 3 ed.
The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy
The effects of compressive preloads on the compression-after...

by Alan T. Nettles

1992 2 ed.
Analytical comparison of three stiffened panel concepts
Analytical comparison of three stiffened panel concepts

by Jill M. Maloney

1995 2 ed.
Test load verification through strain data analysis
Test load verification through strain data analysis

by V. Verderaime

1995 2 ed.
Reliability-based failure analysis of brittle materials
Reliability-based failure analysis of brittle materials

by Lynn M. Powers

1989 2 ed.
Prestraining and its influence on subsequent fatigue life
Prestraining and its influence on subsequent fatigue life

by Sreeramesh Kalluri

1995 2 ed.
The effects of compressive preloads on the compression-after-impact strength of carbon/epoxy
The effects of compressive preloads on the compression-after...

by A. T. Nettles

1992 2 ed.
The utilization of advanced composites in military aircraft
The utilization of advanced composites in military aircraft

by North Atlantic Treaty Organization. Advisory Group for Aerospace Research and Development.

1992 2 ed.
Overload and underload effects on the fatigue crack growth behavior of the 2024-T3 aluminum alloy
Overload and underload effects on the fatigue crack growth b...

by D. S. Dawicke

1997 1 ed.
Simplification of fatigue test requirements for damage tolerance of composite interstage launch vehicle hardware
Simplification of fatigue test requirements for damage toler...

by A. T. Nettles

2010 1 ed.
Normalization of impact energy by laminate thickness for compression after impact testing
Normalization of impact energy by laminate thickness for com...

by A. T. Nettles

2013 1 ed.
Measurement of displacement around holes in composite plates subjected to quasi-static compression
Measurement of displacement around holes in composite plates...

by John C. Duke

1986 1 ed.
Behavior of damaged graphite/epoxy laminates under compression loading
Behavior of damaged graphite/epoxy laminates under compressi...

by Bruce A. Byers

1980 1 ed.
Theoretical-experimental correlation for buckling of composite cylinders under combined compression and torsion
Theoretical-experimental correlation for buckling of composi...

by Carl T. Herakovich

1978 1 ed.
Micromechanics of compression failures in open hole composite laminates
Micromechanics of compression failures in open hole composit...

by Eunice Gail Guynn

1987 1 ed.
Buckling and postbuckling behavior of square compression-loaded graphite-epoxy plates with circular cutouts
Buckling and postbuckling behavior of square compression-loa...

by Michael P. Nemeth

1990 1 ed.
Analysis of selected compression splice joint locations in a graphite-epoxy transport wing stub box
Analysis of selected compression splice joint locations in a...

by Dawn C. Jegley

1995 1 ed.
Investigation of anomalous behavior in metallic-based materials under compressive loading
Investigation of anomalous behavior in metallic-based materi...

by Christopher M. Gil

1998 1 ed.
Analysis and test of superplastically formed titanium hat-stiffened panels under compression
Analysis and test of superplastically formed titanium hat-st...

by Randall C. Davis

1986 1 ed.